{"product_id":"prime-solution-5253","title":"Prime Solution 5253 Primer","description":"\u003ch3\u003eHOW TO APPLY PS-5253 METAL PRIMER FOR OIL CONTAMINATED METALS:\u003c\/h3\u003e\n\u003cp\u003eQuality paint jobs occur with quality preparation, products, and application.  Preparation includes cleaning the surface to be painted to remove all contaminants. Some customers do not have the proper equipment to adequately clean parts to be coated with water-based coatings and may only solvent wash parts. For those customers, we provided Prime Solution 5253. PS 5253, in laboratory tests using mineral oils, steel test plates were coated with oil and wiped with a paper towel to remove excess oil. The test plates were then sprayed with PS 5253 and air dried for 7 days or heat dried at 160°F for 2 hours.\u003c\/p\u003e\n\u003cp\u003ePrime Solution 5253 was then tested for adhesion using ASTM D3359 cross cross-hatching test method and rated 5B or 100% adhesion.  While we would always recommend that surfaces be cleaned as well as possible, tests indicate that PS 5253 can supply a quality paint job on surfaces with some oil contamination.\u003cbr\u003e\u003cstrong\u003eWe recommend you test PS 5253 in your process to determine results in your\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eapplication.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSteel surfaces should have rust, grease, dirt, oil or loose paint removed.  We recommend washing with BC 4000 Cleaner\/degreaser.  Solvent wash and wipe would be the second choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Thin PS 5253 Series Metal Primer for Use:\u003cbr\u003e\u003c\/strong\u003eApply only when air and surface temperatures are between 50\u003csup\u003eo\u003c\/sup\u003eF and 100\u003csup\u003eo\u003c\/sup\u003eF and surface temperature is at least 5\u003csup\u003eo\u003c\/sup\u003eF above the dew point.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRoller or Brush Primer:\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eUse clean water. Thinning is normally not required.  Use 5%-10% if needed (approximately 1\/2 pint per gallon)\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eAir Atomizing Praying Primer:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse clean water. Thinning is normally not required.  Use 5%-10% if needed (approximately 1\/2 pint per gallon)\u003cbr\u003e\u003cstrong\u003eAirless Spraying Primer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse clean water. Thinning is normally not required.  Use 5%-10% if needed (approximately 1\/2 pint per gallon)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleanUp:\u003c\/strong\u003e\u003cbr\u003eSoap and water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eGray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended TopCoats: Silver Bullet AM,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSuperlife 316 DTMR, Steel Tuff 316, Topcoat 1010\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEQUIPMENT RECOMMENDED FOR APPLYING PRIME SOLUTION:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFilter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse 100 mesh stainless steel screen or nylon bag when needed\u003cbr\u003e\u003cstrong\u003eBrush:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse a quality synthetic bristle brush\u003cbr\u003e\u003cstrong\u003eRoller:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse quality roller cover\u003cbr\u003e\u003cstrong\u003eAir Atomized Sprayer:\u003c\/strong\u003e  Follow equipment manufacturer’s nozzle and needle selection recommendation for use with heavy latex paints. Spray at 45-60 psi.\u003cbr\u003e\u003cstrong\u003eAirless Sprayer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2000-2500 psi with 0.015 to 0.019 tip.\u003cbr\u003e\u003cstrong\u003eHot Spraying Temperature\u003c\/strong\u003e: 100-120F\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrime Solution 5253 VOC Information:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e167.4 g\/L or 1.4 Lbs\/Gal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlash Point:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eN\/A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUSDA: \u003c\/strong\u003eMeets USDA requirements for use in federally inspected meat and poultry plants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteel Plus CR Appearance: \u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSatin to flat gray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN. ***\u003cbr\u003eWarning: Do not take internally. Close containers tightly after use and keep upright. In case of spillage, absorb and dispose of in accordance with locally applicable regulations. For specific information refer to the Safety Data Sheets (SDS).\u003c\/strong\u003e\u003c\/p\u003e","brand":"Bio Shield Tech","offers":[{"title":"Default Title","offer_id":52405829894446,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/8052\/6382\/files\/Acrylic-Metal-Primer-Prime-Solution-Gray.jpg?v=1786133128","url":"https:\/\/bioshieldtech.com\/products\/prime-solution-5253","provider":"Bio Shield Tech","version":"1.0","type":"link"}